? semiconductor components industries, llc, 2010 march, 2010 ? rev. 3 1 publication order number: MBR7030WT/d MBR7030WT switchmode power rectifier the switchmode power rectifier, a state ? of ? the ? art device, employs the use of the schottky barrier principle with a platinum barrier metal. features ? dual diode construction; terminals 1 and 3 may be connected for parallel operation at full rating ? 30 v blocking voltage ? low forward voltage drop ? guardring for stress protection and high dv/dt capability ? 175 c operating junction temperature ? pb ? free package is available* mechanical characteristics ? case: epoxy, molded. epoxy meets ul 94 v ? 0 @ 0.125 in ? weight: 4.3 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds ? esd ratings: machine model, b (< 400 v) human body model, 3b (> 8000 v) maximum ratings rating symbol max unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 30 v average rectified forward current (rated v r , t c = 100 c) per leg per device i f(av) 35 70 a peak repetitive forward current, (rated v r , square wave, 20 khz, t c = 100 c) i frm 70 a non ? repetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 500 a peak repetitive reverse current (2.0 s, 1.0 khz) i rrm 2.0 a storage temperature range t stg ? 55 to +175 c operating junction t emperature (note 1) t j ? 55 to +175 c voltage rate of change (rated v r ) dv/dt 10,000 v/ s stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. the heat generated must be less than the thermal conductivity from junction ? to ? ambient: dp d /dt j < 1/r ja . *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. to ? 247 case 340l style 2 2 1 schottky barrier rectifier 70 amperes, 30 volts 1 3 2, 4 3 http://onsemi.com a = assembly location y = year ww = work week g = pb ? free package device package shipping ordering information MBR7030WT to ? 247 30 units/rail MBR7030WTg to ? 247 (pb ? free) 30 units/rail marking diagram MBR7030WT aywwg
MBR7030WT http://onsemi.com 2 thermal characteristics (per diode) rating symbol max unit thermal resistance, junction ? to ? case r jc 0.55 c/w electrical characteristics (per diode) instantaneous forward voltage (note 2) @ i f = 35 amps, t c = 25 c @ i f = 70 amps, t c = 25 c @ i f = 35 amps, t c = 100 c v f 0.55 0.72 0.52 v instantaneous reverse current (note 2) @ rated dc voltage, t c = 25 c @ rated dc voltage, t c = 100 c i r 5.0 250 ma 2. pulse test: pulse width = 300 s, duty cycle < 2.0% typical characteristics figure 1. typical forward voltage figure 2. typical reverse current 100 1 0.1 v f , instantaneous forward voltage (volts) 0.1 0.3 0.5 t j = 150 c t j = ? 55 c t j = 25 c i f , instantaneous forward current (a) v r , reverse voltage (volts) 10 100 25 30 20 10 0 i r , reverse current (ma) 0.1 0.0001 t j = 150 c 0.2 0.4 0.8 t j = 100 c 1000 1 0.01 0.001 t j = ? 55 c t j = 25 c t j = 100 c 10 0.7 0.6 0 15 5
MBR7030WT http://onsemi.com 3 typical characteristics figure 3. current derating (case) 100 110 130 120 0 50 i f(av) , average for ward current (a) t c , case temperature ( c) figure 4. forward power dissipation (per leg) 10 30 40 60 020 50 45 0 15 i f(av) , average forward current (amps) p f(av) , average power dissip ation (watts) figure 5. typical capacitance 10 20 30 40 60 70 80 square wave dc 5 10 25 20 40 140 160 150 v r , reverse voltage (volts) 30 25 20 15 10 5 0 0 10000 c, capacitance (pf) 35 30 dc square wave 9000 8000 7000 6000 5000 4000 3000 2000 1000
MBR7030WT http://onsemi.com 4 package dimensions to ? 247 case 340l ? 02 issue e style 2: pin 1. anode 2. cathode (s) 3. anode 2 4. cathodes (s) n p a k w f d g u e 0.25 (0.010) m yq s j h c 4 123 ? t ? ? b ? ? y ? notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 2 pl 3 pl 0.63 (0.025) m tb m ? q ? l dim min max min max inches millimeters a 20.32 21.08 0.800 8.30 b 15.75 16.26 0.620 0.640 c 4.70 5.30 0.185 0.209 d 1.00 1.40 0.040 0.055 e 1.90 2.60 0.075 0.102 f 1.65 2.13 0.065 0.084 g 5.45 bsc 0.215 bsc h 1.50 2.49 0.059 0.098 j 0.40 0.80 0.016 0.031 k 19.81 20.83 0.780 0.820 l 5.40 6.20 0.212 0.244 n 4.32 5.49 0.170 0.216 p --- 4.50 --- 0.177 q 3.55 3.65 0.140 0.144 u 6.15 bsc 0.242 bsc w 2.87 3.12 0.113 0.123 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. MBR7030WT/d switchmode is a trademark of semiconductor components industries, llc. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
